Research on rolling pressure of cross wedge rolling of parts with eccentric section

WANG Baoyu; HE Tao; HU Zhenghuan

doi:10.13374/j.issn1001-053x.2007.s2.071

Volume 29 Issue S2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2007 > 29(S2): 148-151

WANG Baoyu, HE Tao, HU Zhenghuan. Research on rolling pressure of cross wedge rolling of parts with eccentric section[J]. Chinese Journal of Engineering, 2007, 29(S2): 148-151. doi: 10.13374/j.issn1001-053x.2007.s2.071

Citation:

WANG Baoyu, HE Tao, HU Zhenghuan. Research on rolling pressure of cross wedge rolling of parts with eccentric section[J]. Chinese Journal of Engineering, 2007, 29(S2): 148-151. doi: 10.13374/j.issn1001-053x.2007.s2.071

Citation:

PDF( 466 KB)

Research on rolling pressure of cross wedge rolling of parts with eccentric section

doi: 10.13374/j.issn1001-053x.2007.s2.071

Mechanical Engineering School, University of Science and Technology Beijing, Beijing 100083, China

Received Date: 2006-09-12
Rev Recd Date: 2007-11-20

Available Online: 2021-08-16

Abstract

Abstract

The rolling force of rolling zone were completely and systematically analyzed by using FEM.Based on these researches,the cause and the affection of contact force of non-rolling zone were found out.The researches were benefit to understanding of the forming mechanism,rotating conditions and eccentric limit of cross wedge rolling of parts with eccentric section.
- cross wedge rolling,
- parts with eccentric section,
- contact force,
- rolling force