Design and analysis of a series of new SST-LEJ based on tension straps

QIU Li-fang; WU You-wei; LENG Ying-chun; WANG Jing-lin

doi:10.13374/j.issn2095-9389.2018.10.015

Volume 40 Issue 10

Oct. 2018

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2018 > 40(10): 1267-1274

QIU Li-fang, WU You-wei, LENG Ying-chun, WANG Jing-lin. Design and analysis of a series of new SST-LEJ based on tension straps[J]. Chinese Journal of Engineering, 2018, 40(10): 1267-1274. doi: 10.13374/j.issn2095-9389.2018.10.015

Citation:

QIU Li-fang, WU You-wei, LENG Ying-chun, WANG Jing-lin. Design and analysis of a series of new SST-LEJ based on tension straps[J]. Chinese Journal of Engineering, 2018, 40(10): 1267-1274. doi: 10.13374/j.issn2095-9389.2018.10.015

Citation:

PDF( 6545 KB)

Design and analysis of a series of new SST-LEJ based on tension straps

doi: 10.13374/j.issn2095-9389.2018.10.015

School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China

Received Date: 2017-09-15

Abstract

Abstract

Lamina emergent mechanisms that can realize out-of-plane motion are a kind of compliant mechanisms. They mainly transmit motion, force, and energy through flexible joints; therefore, the design of flexible joints is very important. In the design of flexible joints, the primary requirements are the bending performance and the tensile and compressive properties. However, in general, with the improvement of the bending performance of flexible joints, the tensile and compressive properties deteriorate, and the overall performance of the joints is unable to meet the requirements. To realize joints with better overall performance, tension straps of flexible joints were designed in this study. Based on a flexible joint with high flexibility, a new flexible joint named SS-LEJ was designed. According to the equivalent method, the joint's equivalent spring model was created, and the equations needed to calculate the bending equivalent stiffness of the joints were deduced. In addition, a finite element analysis model was created. The equations were verified by theoretical calculations and ABAQUS simulation analysis. The theoretical calculation and ABAQUS simulation analysis results agree very well. To improve the tensile and compressive properties of SS-LEJ, four kinds of tension straps in different positions and shapes of SST-LEJ were designed. Stress analysis was performed, and the finite element analysis results show that SST3-LEJ and SST4-LEJ are the best two kinds of SST-LEJ. The bending performances and the tensile and compressive properties of SST3-LEJ, SST4-LEJ, SS-LEJ, and inverted bending-orthogonal (IBO) joint were compared. The results show that the bending performances of SST3-LEJ and SST4-LEJ are between those of SS-LEJ and IBO joint, and the tensile and compressive properties of SST3-LEJ and SST4-LEJ are better than those of SS-LEJ and IBO joint. This indicates that the overall performances of SST3-LEJ and SST4-LEJ are better, and the design goal is achieved, which provides an effective method for the design of flexible joints.
- flexible joint,
- bending equivalent stiffness,
- finite element analysis,
- tension straps,
- bending performance,
- tensile and compressive properties

FullText(HTML)

References(13)

References

[1]	Uicker J J, Pennock G R, Shigley J E. Theory of Machines and Mechanisms. 4th Ed. Oxford:Oxford University Press, 2011
[2]	Howell L L. Compliant Mechanisms. New York:John Wiley&Sons Inc, 2001
[3]	Smith S T. Flexures:Elements of Elastic Mechanisms. CRC Press, 2000
[4]	Lobontiu N. Compliant Mechanisms:Design of Flexure Hinges. CRC Press, 2003
[5]	Jacobsen J O, Howell L L, Magleby S P. Components for the design of lamina emergent mechanisms//ASME 2007 International Mechanical Engineering Congress and Exposition. Seattle, 2007:165
[6]	Jacobsen J O, Winder B G, Howell L L, et al. Lamina emergent mechanisms and their basic elements. J Mechanisms Robotics, 2010, 2(1):01003
[7]	Zirbel S A, Trease B P, Magleby S P, et al. Deployment methods for an origami-inspired rigid-foldable array//Proceedings of the 42nd Aerospace Mechanisms Symposium. NASA Goddard Space Flight Center, 2014:189
[8]	Aten Q T, Jensen B D, Burnett S H, et al. A self-reconfiguring metamorphic nanoinjector for injection into mouse zygotes. J Rev Sci Instrum, 2014, 85(5):055005-1
[16]	Wilding S E, Howell L L, Magleby S P. Spherical lamina emergent mechanisms. Mechanism Machine Theory, 2012, 49:187
[17]	Jacobsen J O, Chen G M, Howell L L, et al. Lamina emergent torsional (LET) joint. Mechanism Machine Theory, 2009, 44(11):2098
[18]	Aten Q T, Jensen B D, Howell L L. Geometrically non-linear analysis of thin-film compliant MEMS via shell and solid elements. Finite Elem Anal Des, 2012, 49(1):70
[21]	Delimont I L, Magleby S P, Howell L L. A family of dual-segment compliant joints suitable for use as surrogate folds. J Mech Des, 2015, 137(9):092302
[23]	Chen G M, Howell L L. Two general solutions of torsional compliance for variable rectangular cross-section joints in compliant mechanisms. Precis Eng, 2009, 33(3):268