Finite element analysis of work roll contour influence on aluminum foil profile

LIU Hua; WU Bin; HE Anrui; YANG Quan; CHEN Zhangke

doi:10.13374/j.issn1001-053x.2005.01.023

Volume 27 Issue 1

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2005 > 27(1): 90-93

LIU Hua, WU Bin, HE Anrui, YANG Quan, CHEN Zhangke. Finite element analysis of work roll contour influence on aluminum foil profile[J]. Chinese Journal of Engineering, 2005, 27(1): 90-93. doi: 10.13374/j.issn1001-053x.2005.01.023

Citation:

LIU Hua, WU Bin, HE Anrui, YANG Quan, CHEN Zhangke. Finite element analysis of work roll contour influence on aluminum foil profile[J]. Chinese Journal of Engineering, 2005, 27(1): 90-93. doi: 10.13374/j.issn1001-053x.2005.01.023

Citation:

PDF( 449 KB)

Finite element analysis of work roll contour influence on aluminum foil profile

doi: 10.13374/j.issn1001-053x.2005.01.023

1. National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China;
2. Xinjiang Zhonghe Co. Ltd., Wulumuqi 830013, China

Received Date: 2004-03-10
Rev Recd Date: 2004-07-09

Available Online: 2021-08-17

Abstract

Abstract

A finite element analysis model for calculation of the gap and the rolling pressure axial distribution of different work roll contours under the condition of cool roll (initial rolling) and hot roll (stable rolling) respectively is established by treating aluminum foil rolls and aluminum foil integrally. The influence of work roll contour on aluminum foil profile was analyzed. It is suggested that the top work roll take AFW (Aluminum Foil Work Roll) contour and the bottom work roll take flat contour in aluminum foil rolling.
- aluminum foil rolling,
- roll contour,
- profile,
- rolling force,
- finite element method