Double Glow Plasma Surface Alloying Technique by Ni-Cr-Mo-Cu Alloys

XU Jiang; XIE Xishan; XU Zhong

doi:10.13374/j.issn1001-053x.2002.06.011

Volume 24 Issue 6

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2002 > 24(6): 623-626

XU Jiang, XIE Xishan, XU Zhong. Double Glow Plasma Surface Alloying Technique by Ni-Cr-Mo-Cu Alloys[J]. Chinese Journal of Engineering, 2002, 24(6): 623-626. doi: 10.13374/j.issn1001-053x.2002.06.011

Citation:

XU Jiang, XIE Xishan, XU Zhong. Double Glow Plasma Surface Alloying Technique by Ni-Cr-Mo-Cu Alloys[J]. Chinese Journal of Engineering, 2002, 24(6): 623-626. doi: 10.13374/j.issn1001-053x.2002.06.011

XU Jiang, XIE Xishan, XU Zhong. Double Glow Plasma Surface Alloying Technique by Ni-Cr-Mo-Cu Alloys[J]. Chinese Journal of Engineering, 2002, 24(6): 623-626. doi: 10.13374/j.issn1001-053x.2002.06.011

Citation:

PDF( 561 KB)

Double Glow Plasma Surface Alloying Technique by Ni-Cr-Mo-Cu Alloys

doi: 10.13374/j.issn1001-053x.2002.06.011

1. Material Science and Engineering School, UST Bejing, Bejing 100083, China;
2. Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan 030024, China

Received Date: 2001-09-20
Available Online: 2021-08-26

Abstract

Abstract

The multi-element Ni-Cr-Mo-Cu surface alloying layer on the matrix of low carbon steel 20 was investigated by means of the double glow plasma surface alloying technique. The results show that the technical parameters have obvious effect on the total content of alloyed elements and the thickness of the alloying layer. The optimum parameters of alloying Hastelloy C-2000 were obtained by the orthogonal test.
- double glow,
- multi-element,
- technique