Development of Rolling Force Model for 2800 mm Steel Plate Finshing Mill

DAI Jiangbo; ZHANG Qingdong; CHEN Xianlin; SUN Lin; ZHANG Guangxin; ZHANG Chen

doi:10.13374/j.issn1001-053x.2002.03.065

Volume 24 Issue 3

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2002 > 24(3): 318-321

DAI Jiangbo, ZHANG Qingdong, CHEN Xianlin, SUN Lin, ZHANG Guangxin, ZHANG Chen. Development of Rolling Force Model for 2800 mm Steel Plate Finshing Mill[J]. Chinese Journal of Engineering, 2002, 24(3): 318-321. doi: 10.13374/j.issn1001-053x.2002.03.065

Citation:

DAI Jiangbo, ZHANG Qingdong, CHEN Xianlin, SUN Lin, ZHANG Guangxin, ZHANG Chen. Development of Rolling Force Model for 2800 mm Steel Plate Finshing Mill[J]. Chinese Journal of Engineering, 2002, 24(3): 318-321. doi: 10.13374/j.issn1001-053x.2002.03.065

Citation:

PDF( 1234 KB)

Development of Rolling Force Model for 2800 mm Steel Plate Finshing Mill

doi: 10.13374/j.issn1001-053x.2002.03.065

1. Mechanical Engineering School, UST Beijing, Beijing 100083, China;
2. Wuhan Iron and Steel Co. Ltd, Wuhan 430080, China

Received Date: 2001-12-10
Available Online: 2021-08-21

Abstract

Abstract

Considering the effect of temperature on rolling parameter, the ANSYS software was used to calculate the rolling parameter in the producing process of 2800mm heavy-late machine, the stress distribution within the deforming body, the stress distribution on the contact surface and rolling force. The model of rol-ling force was built on the basis of these parameter. At last,the parameters are improved in rolling process. The calculated results are close to the measured ones.
- plate,
- rollingforce,
- model