Heat Transfer Analysis and Heat Transfer Coefficient Determination of Stainless Steel

Cao Hui; Zhang Peng; Gao Yongsheng; Tian Xiaochun; Wang Quanli

doi:10.13374/j.issn1001-053x.1998.06.008

Volume 20 Issue 6

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1998 > 20(6): 541-544,555

Cao Hui, Zhang Peng, Gao Yongsheng, Tian Xiaochun, Wang Quanli. Heat Transfer Analysis and Heat Transfer Coefficient Determination of Stainless Steel[J]. Chinese Journal of Engineering, 1998, 20(6): 541-544,555. doi: 10.13374/j.issn1001-053x.1998.06.008

Citation:

Cao Hui, Zhang Peng, Gao Yongsheng, Tian Xiaochun, Wang Quanli. Heat Transfer Analysis and Heat Transfer Coefficient Determination of Stainless Steel[J]. Chinese Journal of Engineering, 1998, 20(6): 541-544,555. doi: 10.13374/j.issn1001-053x.1998.06.008

Citation:

PDF( 500 KB)

Heat Transfer Analysis and Heat Transfer Coefficient Determination of Stainless Steel

doi: 10.13374/j.issn1001-053x.1998.06.008

1. Material Science and Engineering School, UST Beijing, Beijing 100083 China;
2. The Capital Iron and Steel Corporation

Received Date: 1998-03-25
Available Online: 2021-08-27

Abstract

Abstract

The heat transfer coefficient at the contacting surface of two specimen was calculated. In laboratory, the temperatures of some points on surface of 1Cr18Ni9Ti were measured under the condition of hot non-deforming press. From these data, the heat trans-fer characters of the speciman were analysed. By finite difference technique, the heat trans-fer coefficient of 1Cr18Ni9Ti stainless steel could be obtained.
- heat transfer coefficient,
- finite difference method,
- 1Cr18Ni9Ti,