Identification of Phases for Etching Interaction of Fe with Diamond

Guo Ximian; Wang Lan

doi:10.13374/j.issn1001-053x.1997.02.010

Volume 19 Issue 2

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 1997 > 19(2): 165-167,177

Guo Ximian, Wang Lan. Identification of Phases for Etching Interaction of Fe with Diamond[J]. Chinese Journal of Engineering, 1997, 19(2): 165-167,177. doi: 10.13374/j.issn1001-053x.1997.02.010

Citation:

Guo Ximian, Wang Lan. Identification of Phases for Etching Interaction of Fe with Diamond[J]. Chinese Journal of Engineering, 1997, 19(2): 165-167,177. doi: 10.13374/j.issn1001-053x.1997.02.010

Guo Ximian, Wang Lan. Identification of Phases for Etching Interaction of Fe with Diamond[J]. Chinese Journal of Engineering, 1997, 19(2): 165-167,177. doi: 10.13374/j.issn1001-053x.1997.02.010

Citation:

Guo Ximian, Wang Lan. Identification of Phases for Etching Interaction of Fe with Diamond[J]. Chinese Journal of Engineering, 1997, 19(2): 165-167,177. doi: 10.13374/j.issn1001-053x.1997.02.010

PDF( 331 KB)

Identification of Phases for Etching Interaction of Fe with Diamond

doi: 10.13374/j.issn1001-053x.1997.02.010

Guo Ximian¹,
Wang Lan²

1. Applied Science School, UST Beijing, Beijing 100083, China;
2. Material Science and Engineering School, UST Beijing, Beijing 100083, China

Received Date: 1996-08-06
Available Online: 2021-08-27

Abstract

Abstract

The etching interaction of Fe with diamond was studied after sintering at 950 ℃ for 6 min. According to the result of AES C KLL line, the state of carbon near the diamond-iron interface was determined to be considered as graphite but not Fe₃C. Carbon atom is dissolved from diamond crystal lattice into iron.
- diamond,
- interface,
- etching