碳納米紙復合材料的拉伸應變協同性

霍慶生; 金嘉琦; 王曉強; 盧少微; 馬克明; 張璐; 徐濤

doi:10.13374/j.issn2095-9389.2018.06.009

碳納米紙復合材料的拉伸應變協同性

doi: 10.13374/j.issn2095-9389.2018.06.009

1) 沈陽工業大學機械工程學院, 沈陽 110870
2) 沈陽航空航天大學航空航天工程學部, 沈陽 110136

基金項目:

沈陽市國際科技合作項目(F16-212-6-00)

國家自然科學基金資助項目(11602150，U1733123)

沈陽科學計劃重點科技研發計劃資助項目(17-208-9-00)

遼寧省自然科學基金資助項目(20170540695)

航空科學基金資助項目(2016ZA54004)

遼寧省高等學校優秀人才支持計劃資助項目(LR2015048)

詳細信息

中圖分類號: TG142.71
計量
- 文章訪問數: 974
- HTML全文瀏覽量: 513
- PDF下載量: 18
- 被引次數: 0
出版歷程
- 收稿日期: 2017-08-30

Tensile strain synergistic of carbon nanotube buckypaper composites

1) School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110870, China
2) Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China

摘要

摘要: 由于碳納米紙與復合材料具有良好的界面結合性能,以及良好的導電導熱性能,因此可以被用于復合材料的全壽命健康監測.本文制備了碳納米紙及其傳感器,以及在不同位置嵌入碳納米紙傳感器的復合材料,并進行拉伸加載卸載測試.獲得了碳納米紙傳感器電阻變化率隨傳統應變片測得的復合材料層合板應變的變化趨勢,擬合得到了碳納米紙傳感器的應變傳感系數,闡明了復合材料在變形時的協同性,證明了碳納米紙傳感器可以用于復合材料的拉伸疲勞損傷監測.
- 碳納米紙 /
- 傳感器 /
- 應變傳感 /
- 復合材料 /
- 拉伸疲勞損傷
Abstract: As carbon nanotube buckypaper composites have a good interfacial properties, conductivity, and thermal conductivity, they can be used for whole-life health monitoring of composite materials. In this paper, carbon nanotube buckypaper and its sensors have been prepared. Meanwhile, composites samples with the buckypaper sensors at different positions were obtained. Tensile loading and unloading tests were performed. By analyzing changes in the buckypaper resistance change rate and composite strain, a strain-sensing coefficient was obtained to clarify the synergistic deformation of composite materials. The results of this study demonstrate that buckypaper sensor can be used to monitor the tensile fatigue damage of composites.
- buckypaper /
- sensor /
- strain sensing /
- composites /
- tensile fatigue damage

HTML全文

參考文獻(11)

[3]	Salvetat-Delmotte J P, Rubio A. Mechanical properties of carbon nanotubes:a fiber digest for beginners. Carbon, 2002, 40(10):1729
[4]	Coleman J N, Khan U, Blau WJ, et al. Small but strong:a review of the mechanical properties of carbon nanotube-polymer composites. Carbon, 2006, 44(9):1624
[5]	Treacy M M J, Ebbesen T W, Gibson J M. Exceptionally high Young's modulus observed for individual carbon nanotubes. Nature, 1996, 381:678
[6]	Yu M F, Lourie O, Dyer M J, et al. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science, 2000, 287(5453):637
[7]	Srivastava R K, Vemuru V S M, Zeng Y, et al. The strain sensing and thermal-mechanical behavior of flexible multi-walled carbon nanotube/polystyrene composite films. Carbon, 2011, 49(12):3928
[8]	Zhang R, Deng H, Valenca R, et al. Strain sensing behaviour of elastomeric composite films containing carbon nanotubes under cyclic loading. Compos Sci Technol, 2013, 74:1
[9]	Zhang R, Deng H, Valenca R, et al. Carbon nanotube polymer coatings for textile yarns with good strain sensing capability. Sens Actuators A, 2012, 179:83
[10]	Gao L M, Thostenson E T, Zhang Z G, et al. Coupled carbon nanotube network and acoustic emission monitoring for sensing of damage development in composites. Carbon, 2009, 47(5):1381
[11]	Chen H Y, Jacobs O, Wu W, et al. Effect of dispersion method on tribological properties of carbon nanotube reinforced epoxy resin composites. Polym Test, 2007, 26(3):351
[12]	Sandler J K W, Kirk J E, Kinloch I A, et al. Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites. Polymer, 2003, 44(19):5893
[13]	Rein M D, Breuer O, Wagner H D. Sensors and sensitivity:carbon nanotube buckypaper films as strain sensing devices. Compos Sci Technol, 2011, 71(3):373