Creep and water loss characteristics in hardening bodies of water-rich filling materials
-
摘要: 為探討富水充填材料在時效作用下的變形及其硬化體內水分損失特征,本文研究一定水固質量比的富水充填材料在不同應力水平下的蠕變性能,并通過掃描電鏡觀察、差熱-熱重分析等實驗探討充填體在蠕變過程前后的形變特征、水分損失及其與外界荷載的關系.結果表明:水固質量比為2.0的富水充填材料失穩破壞的臨界應力為1.96 MPa,為其單軸抗壓強度的90%;蠕變不會對富水充填材料中結合水含量造成影響;富水充填材料失穩破壞時內部結構發生非結合水的流失,非結合水含量損失相對值與所受荷載水平呈線性正相關關系;非結合水的流失導致結構內部出現更多的空隙,這些空隙在外界荷載作用下會迅速被壓密,產生較大變形,導致充填體局部失穩,進而影響采空區的整體穩定.Abstract: In order to investigate the characteristics of deformation and water loss of hardened paste of water-rich filling material under aging effect,the creep property of water-rich filling materials with a certain mass ratio of water to solid was studied in different stress conditions. The deformation characteristics,water loss and its relationship with external load on the filling body in the process of creep were analyzed by using scanning electron microscopy and differential thermal analysis-thermal gravimetry(DTA-TG). It is found that the instability and failure critical stress of water-rich filling materials with a 2.0 water-to-solid mass ratio is 1.96 MPa,which is 90% of their compressive strength. Creep cannot affect the content of combined water in water-rich filling materials. But unbound water in water-rich filling materials can run off when instability and failure happen. The relative loss value of unbound water content is of linear positive correlation with the external load level. The loss of unbound water can induce more interspaces in waterrich filling materials. These cracks are quickly pressed and the hardening body produces large deformation under the external load,which leads to the local instability of the filling body and thus affects the overall stability of the goaf.
-
Key words:
- mining /
- filling materials /
- creep characteristics /
- hardening /
- water loss
-

計量
- 文章訪問數: 281
- HTML全文瀏覽量: 112
- PDF下載量: 7
- 被引次數: 0