基于可行工況集的帶鋼連續熱處理過程優化策略

豆瑞鋒; 溫治; 董斌; 程淑明; 馮霄紅; 李志

doi:10.13374/j.issn1001-053x.2012.08.011

基于可行工況集的帶鋼連續熱處理過程優化策略

doi: 10.13374/j.issn1001-053x.2012.08.011

豆瑞鋒¹,
溫治^1,2, ,,
董斌^1,3,4,
程淑明³,
馮霄紅^3,4,
李志^3,4

1. 北京科技大學機械工程學院, 北京 100083;
2. 北京科技大學冶金工業節能減排北京市重點實驗室, 北京 100083;
3. 中冶賽迪重慶賽迪工業爐有限公司, 重慶 400013;
4. 中冶賽迪重慶市鋼鐵冶金工程技術研究中心, 重慶 400013

基金項目:

中央高校基本科研業務費專項(FRF-AS-10-005B)

詳細信息

通訊作者:
溫治,E-mail:wenzhi@me.ustb.edu.cn

中圖分類號: TK32
計量
- 文章訪問數: 123
- HTML全文瀏覽量: 21
- PDF下載量: 5
- 被引次數: 0
出版歷程
- 收稿日期: 2011-05-28
- 網絡出版日期: 2021-07-30

Optimization strategies of steel strip continuous heat treatment based on feasible sets

DOU Rui-feng¹,
WEN Zhi^{1,2
, ,},
DONG Bin^1,3,4,
CHENG Shu-ming³,
FENG Xiao-hong^3,4,
LI Zhi^3,4

1. School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China;
2. Beijing Key Laboratory of Energy Saving and Emission Reduction for Metallurgical Industry, University of Science and Technology Beijing, Beijing 100083, China;
3. Chongqing CISDI Industrial Furnace Co. Ltd., Chongqing 400013, China;
4. Chongqing CISDI Engineering Research Center for Iron & Steelmaking Plant Integration Co. Ltd., Chongqing 400013, China

摘要

摘要: 在帶鋼連續熱處理熱過程機理數學模型的基礎上,提出了帶鋼連續熱處理過程中的穩定工況和變工況過程的優化策略.根據穩定工況過程的啟發式優化策略,得到了各鋼簇(由鋼種、規格確定)的可行工況集,基于各鋼簇可行工況集之間的關系,研究開發了變工況條件下帶鋼連續熱處理過程優化控制策略.該策略通過調整機組的操作參數,使得帶鋼溫度與熱處理目標溫度之間的誤差最小.通過對現場實際采用的變工況控制策略與本文開發的策略的對比分析表明,基于可行工況集的變工況策略可以在更短時間內實現變工況過程,更精準地控制變工況期間的帶鋼溫度.
- 帶鋼 /
- 熱處理 /
- 工序 /
- 優化 /
- 可行工況集
Abstract: Based on the heat transfer model, optimization strategies were proposed for the steady and transition operating modes during steel strip continuous heat treatment processes. Feasible sets for every steel group (classed by steel grade and size) can be obtained by a heuristic optimization strategy in the steady operating mode. Based on the relations of feasible sets of different steel groups, an optimization strategy for the transition operating mode was developed, which minimized the differences between the steel strip temperature and target temperature of heat treatment by the adjustment of operating parameters. A comparison between the control strategy used in steelmaking plants and the new developed shows that the optimization strategy based on feasible sets can fulfill the transition operating mode more rapidly and control the temperature of steel strips more accurately.
- steel strips /
- heat treatment /
- working procedure /
- optimization /
- feasible sets