Effects of operating pressure and environmental factor on membrane's filtration function during the treatment of car-washing wastewater with a membrane bioreactor
-
摘要: 通過膜生物反應器(MBR)處理某車輛廠洗車廢水的實驗研究,結合理論計算,分析了操作壓力及環境因素對膜過濾性能的影響.研究結果表明,在低壓區,膜本身阻力占主導地位,它與操作條件無關;在中壓區,濃差極化阻力占主導地位,它與其他操作條件關系密切;在高壓區,凝膠層阻力占主導地位,操作壓力增加對膜通量影響不大,在此階段膜分離特性還與污泥濃度、膜面流速等操作條件有關.所以,采用膜反應器處理洗車廢水,在MBR中存在一個臨界壓力,當操作壓力高于臨界壓力時,膜通量隨操作壓力變化不大,而膜表面污染卻明顯加劇.因而設計膜生物反應器時,操作壓力是一個重要的參數.此外,還研究了溫度、pH值、水力停留時間等環境影響因素對膜過濾性能的影響.Abstract: The treatment of car-washing wastewater by using membrane bioreactor (MBR) was investigated. The influences of operating pressure and environmental factors on the membrane's filtration function were analyzed combining with theoretical calculations. In the meiobar range, membrane resistance was the dominant role, independent of operating terms. In the middle pressure range, concentration difference-polarized resistance was the dominant role, depending much on operating terms. In the high pressure range, gelatin resistance was the dominant role. The influences of the operating pressure was small on the membrane flux, and the mem-brane's separating characteristics were related much with mud concentration, membrane flow velocity and etc. This study showed that when MBR was used to dispose car-washing wastewater, there was a critical pressure in MBR. When the operating pressure was higher than the critical pressure, the membrane flux was changed slightly, but membrane surface pollution was increased distinctly. Therefore when MBR was designed, the operating pressure was a key parameter. The influences of environmental factors such as temperature, pH and hydraulic retention time on the membrane's filtration function were investigated.
-
Key words:
- membrane bioreactor (MBR) /
- operating pressure /
- membrane flux /
- car-washing wastewater /
- resistance
-

計量
- 文章訪問數: 193
- HTML全文瀏覽量: 72
- PDF下載量: 7
- 被引次數: 0