Experimental Study and Temperature Simulation of the Laser Hardening Procedure on the Semi-steel Roll
-
摘要: 從實驗角度分析了半鋼軋輥表面經過激光相變硬化處理后的性能改善情況,著重討論了改變工藝參數對激光淬火效果的影響.利用數值模擬的分析手段對軋輥在激光輻照之下經歷的熱循環過程作了詳細描述,說明了輥面激光淬火的原理,對光斑附近區域的溫度梯度分布作了分析,初步探討了激光淬火裂紋形成的原因.Abstract: The property improvement of the semi-steel roll surface after laser quenching was investigated experimentally, and the effect of technological parameters on laser quenching was analyzed. The thermal circulating procedure of the surface under the laser beam was elaborated by numerical simulation methods and the principle of laser quenching on the surface is explained consequently. The distribution of thermal gradient near the laser spot was obtained, and the reason for crack formation during laser beam scanning was discussed.
-
Key words:
- semi-steel roll /
- laser /
- transformation hardening /
- numerical simulation /
-

計量
- 文章訪問數: 149
- HTML全文瀏覽量: 28
- PDF下載量: 6
- 被引次數: 0