Design and Fabrication of S-Type B4C-SiC/C Functionally Graded Materials
-
摘要: 對(l-x)(80% B4C-20% SiC)/x C(體積分數)功能梯度材料的x=0.2,0.4,0.6,0.8的各層分別在2000℃,20MPa進行了熱壓,測定了各層的密度,線膨脹系數,彈性模量和抗彎強度等.按線性成分分布函數的6層和11層梯度材料熱壓后都出現了裂紋.采用了不同于冪函數的S型成分分布函數設計,熱壓了11層(x=0.2~1.0)的功能梯度材料,其抗彎強度為216MPa,抗熱震性>500℃.Abstract: The x=0.2,0.4,0.6,80 layers of (l -x) (80%B4C-20%SiC)/xC (volume fraction) Functionally Graded Materials were hot-pressed respectively. The density, linear thermal expansion, elastic modulus and flexural strength were tested. There are crackles in FGMs of 6 and 11 layers that are designed by linear function. The S-type function of compositional distribution as a designed method applied to investigate FGM. As a result the flexural strength is 216 MPa and thermal shock resistance Δfc>500℃ for 11 layers (x=0.2~l) FGMs of S-type.
-
Key words:
- functionally graded materials /
- S-type composition distribution function /
- B4C /
- SiC /
- C
-
點擊查看大圖
計量
- 文章訪問數: 239
- HTML全文瀏覽量: 70
- PDF下載量: 10
- 被引次數: 0
下載:
