Formation of NbC Detained Layer in Blast Furnace Process for Nb-bearing Iron Ore
-
摘要: 包頭鐵礦含有大量的鈮,目前包鋼提鈮流程是鋼鐵冶金主流程的分支流程,其中高爐是火法還原富集鈮的主要部分。實驗研究發現,在高爐碳熱還原過程中鈮會被還原成碳化鈮(NbC),并在渣鐵界面形成NbC滯留帶。由于滯留帶的存在,阻礙了鈮進入鐵相,影響了鈮的還原回收率。NbC在碳飽和鐵液中有一定的溶解度,溫度升高使溶解度增加,有利于提高鈮的還原回收率。Abstract: The Nb extraction process in Baotou Steel Company is a process accompanied with the iron and steel-making process, in which the blast furnace smelting is one of the main step of extracting Nb. It was discovered by experiment that niobium oxide could be turned into niobium carbide(NbC) during carbonthermal reduction and the detained NbC layer exised at the metal-slag interface. The existence of tne detained NbC layer obstructs the entering of Nb into iron and has bad effects on the Nb recovery ratio. NbC can dissolve into liquid iron. Raising temperature is favourable for the increasing of the solubility of NbC in iron and the raising of Nb recovery ratio.
-
Key words:
- Nb extraction /
- blast furnace /
- NbC /
- carbonthermal reduction
-

計量
- 文章訪問數: 198
- HTML全文瀏覽量: 65
- PDF下載量: 10
- 被引次數: 0