Foam Behavior Parameters for Foaming Caused by Reducing Fe<sub>2</sub>O<sub>3</sub> with Graphite in the Synthetic Slag of Smelting Reduction

WU Keng; ZHANG Erhua; CHU Shaojun; CHEN Chunyuan; LI Hongmin; GUO Yingbo

doi:10.13374/j.issn1001-053x.2001.03.030

Volume 23 Issue 3

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2001 > 23(3): 204-207

WU Keng, ZHANG Erhua, CHU Shaojun, CHEN Chunyuan, LI Hongmin, GUO Yingbo. Foam Behavior Parameters for Foaming Caused by Reducing Fe2O3 with Graphite in the Synthetic Slag of Smelting Reduction[J]. Chinese Journal of Engineering, 2001, 23(3): 204-207. doi: 10.13374/j.issn1001-053x.2001.03.030

Citation:

WU Keng, ZHANG Erhua, CHU Shaojun, CHEN Chunyuan, LI Hongmin, GUO Yingbo. Foam Behavior Parameters for Foaming Caused by Reducing Fe₂O₃ with Graphite in the Synthetic Slag of Smelting Reduction[J]. Chinese Journal of Engineering, 2001, 23(3): 204-207. doi: 10.13374/j.issn1001-053x.2001.03.030

Citation:

PDF( 432 KB)

Foam Behavior Parameters for Foaming Caused by Reducing Fe₂O₃ with Graphite in the Synthetic Slag of Smelting Reduction

doi: 10.13374/j.issn1001-053x.2001.03.030

Metallurgy School, UST Beijing, Beijing 100083, China

Received Date: 2001-01-22

Abstract

Abstract

The relationship between the foam height and time has been measured for foaming processes caused by reducing Fe₂O₃ in smelting reduction synthetic slap. The foam behavior parameters under different condition were determined by means of experimental results and foam behavior equations. In this way, the foaming process caused by reducing Fe₂O₃ in smelting reduction process could be described quantitatively. The results provide necessary basis for controlling the foam phenomenon in iron bath.
- foaming slag,
- foam caused by reduction,
- smelting reduction,
- foam behavior parameter