Crystallization Temperature of Continuous Casting Mold Fluxes

SHU Jun; JIN Shantong; ZHANG Li; CAO Weiwen; SONG Renbo; WANG Xiangguang

doi:10.13374/j.issn1001-053x.2000.06.006

Volume 22 Issue 6

Aug. 2021

Turn off MathJax

Article Contents

Article Navigation > Chinese Journal of Engineering > 2000 > 22(6): 508-511

SHU Jun, JIN Shantong, ZHANG Li, CAO Weiwen, SONG Renbo, WANG Xiangguang. Crystallization Temperature of Continuous Casting Mold Fluxes[J]. Chinese Journal of Engineering, 2000, 22(6): 508-511. doi: 10.13374/j.issn1001-053x.2000.06.006

Citation:

SHU Jun, JIN Shantong, ZHANG Li, CAO Weiwen, SONG Renbo, WANG Xiangguang. Crystallization Temperature of Continuous Casting Mold Fluxes[J]. Chinese Journal of Engineering, 2000, 22(6): 508-511. doi: 10.13374/j.issn1001-053x.2000.06.006

Citation:

PDF( 442 KB)

Crystallization Temperature of Continuous Casting Mold Fluxes

doi: 10.13374/j.issn1001-053x.2000.06.006

1. Metallurgy School UST Beijing, Beijing 100083, China;
2. Zhong Yuan Environment Engineering Ltd, Suzhou 215143, China

Received Date: 2000-06-06
Available Online: 2021-08-27

Abstract

Abstract

The influences of chemical compositions and cooling rate on the crystallization temperature of mold fluxes were studied with WCT-2 DTA. Under the experiment conditions, the crystallization temperature increases with the increase of basicity and then decreases; the crystallization temperature increases with F contend and decreases with the enrichment of Na₂O, Al₂O₃, MgO. Increasing cooling rate, the crystallization temperature is reduced slightly.
- continuous casting,
- mold fluxes,
- crystallization temperature,
- cooling rate