<th id="5nh9l"></th><strike id="5nh9l"></strike><th id="5nh9l"><noframes id="5nh9l"><th id="5nh9l"></th><strike id="5nh9l"></strike>
<progress id="5nh9l"><noframes id="5nh9l"><th id="5nh9l"><noframes id="5nh9l">
<th id="5nh9l"></th> <strike id="5nh9l"><noframes id="5nh9l"><span id="5nh9l"></span>
<progress id="5nh9l"><noframes id="5nh9l"><span id="5nh9l"><noframes id="5nh9l"><span id="5nh9l"></span><strike id="5nh9l"><noframes id="5nh9l"><strike id="5nh9l"></strike>
<span id="5nh9l"><noframes id="5nh9l">
<span id="5nh9l"><noframes id="5nh9l">
<span id="5nh9l"></span><span id="5nh9l"><video id="5nh9l"></video></span>
<th id="5nh9l"><noframes id="5nh9l"><th id="5nh9l"></th>
<progress id="5nh9l"><noframes id="5nh9l">

基于塊體化程度和物元可拓理論的頂板穩定性分級方法及應用

Roof stability classification method based on blockiness and the matter-element extension theory and its application

  • 摘要: 基于塊體化程度和物元可拓理論,提出一種適用于頂板穩定性分級的BET法(classification method based on blockiness and extension theory).從三維空間上運用塊體化程度指標刻化頂板圍巖的完整性,建立以塊體化程度、單軸抗壓強度、節理條件和地下水條件為指標的評價體系;構建物元可拓模型的經典域、節域和待評物元,分析指標間不相容問題,用可拓層次分析法計算指標權重;綜合計算關聯度,制定出穩定性分級方法與標準.選取廣西銅坑礦四個裂隙巖體試驗區,進行BET分級法的工程應用研究.將BET法分級結果分別與RMR法、RSR法、Q法等傳統方法及BT法的結果進行了對比.結果表明:與其他各類分級方法相比,BET法所選指標體系更全面,評價方法更客觀、科學,評價結果更準確.

     

    Abstract: Based on blockiness and the matter-element extension theory,this article introduces BET method(classification method based on blockiness and the extension theory) especially suitable for roof stability analysis. The integrity of roof rock was reflected by blockiness in three-dimensional space,and an evaluation system was constructed with blockiness,uniaxial compressive strength,joint condition and groundwater condition as evaluating indicators. The classical domain,the segment and the object element of the model were established,the incompatible problems between these indexes were analyzed,and the index weights were calculated by the extension method. After the correlation degree was comprehensively calculated,the stability classification method and standard were determined. Selecting four test areas of fractured rock mass in Guangxi Tongkeng Mine,an engineering application study of BET classification method was carried out. The results of traditional classification methods,such as RMR method,RSR method and Q method,were respectively compared to that of BET method. It is shown that compared with these traditional classification methods,the index system selected by BET method is more comprehensive and its evaluation method is more objective and scientific.

     

/

返回文章
返回
<th id="5nh9l"></th><strike id="5nh9l"></strike><th id="5nh9l"><noframes id="5nh9l"><th id="5nh9l"></th><strike id="5nh9l"></strike>
<progress id="5nh9l"><noframes id="5nh9l"><th id="5nh9l"><noframes id="5nh9l">
<th id="5nh9l"></th> <strike id="5nh9l"><noframes id="5nh9l"><span id="5nh9l"></span>
<progress id="5nh9l"><noframes id="5nh9l"><span id="5nh9l"><noframes id="5nh9l"><span id="5nh9l"></span><strike id="5nh9l"><noframes id="5nh9l"><strike id="5nh9l"></strike>
<span id="5nh9l"><noframes id="5nh9l">
<span id="5nh9l"><noframes id="5nh9l">
<span id="5nh9l"></span><span id="5nh9l"><video id="5nh9l"></video></span>
<th id="5nh9l"><noframes id="5nh9l"><th id="5nh9l"></th>
<progress id="5nh9l"><noframes id="5nh9l">
259luxu-164